Load Cell for Weighbridge Manufacturer in India

Load Cell for Weighbridge Manufacturer in India

Matrix Weighing Systems Pvt. Ltd. is a famous Load Cell for Weighbridge Manufacturer in India. Matrix Weighing Systems Pvt. Ltd. was established in 2007 with a clear vision to deliver the most reliable & cost-effective solutions in the weighing industry.

We have two types of Load Cells,

• Digital Load Cell

  • Technical Parameter
    A/D Module Resolution	100000
    Data refresh frequency	50HZ
    Communication baud rate	9600BPS
    Total Error	±0.02%F.S
    Creep Error (30 min)	±0.02%F.S
    Temperature effect sensitivity	±0.02% F.S/10°c
    Temperature range	-30~+70°c
    Zero balance	±0.1%F.S
    Safe overload	150%F.S
    Protection class	IP68
    Recommended input voltage	9~12VDC
    Max input voltage	20VDC
    Max signal transmission distance voltage	1200m

• Analog Load Cell

  • Specification
    Rated capacity: 5ton to 50ton	Operating temperature range: -30 to +70°c
    Rated output:2.0±0.002mv/v	Maximum safe overload 150% OF R.C
    Combined error：±0.03% F.S	Ultimate safe overload；200% OF R.C
    Non-repeatability ±0.02% F.S	Recommended Excitation 10 to 12V DC
    Non-linearity ±0.02% F.S	Maximum Excitation 15V DC
    Hysteresis error： ±0.02% F.S	Environment protection: IP68
    Zero balance: ±1% F.S	Input impedance: 750±10Ω
    Creep error(30minutes): ±0.02% F.S	Output impedance: 702±3Ω 703±5Ω(cable≥15m)
    Temperature effect on zero: ±0.02% F.S	Insulation resistance at 50V DC: ≥ 5000MΩ
    Temperature effect on output: ±0.02% F.S	Material: nickel-plated alloy steel;
    Compensated temperature range: -10 to +40°c	Cable length: 5.2meter(5t); 8meter(10t); 10meter(15t); 10/12meter(20t); 12/16meter(25t~50t), diameter 6mm

For any Enquiry, You can go on our Enquiry Page.

For more details, you can Contact Us.